SENZ reported a horizontal screw centrifuge trial using customer-supplied fermented organic manure material. The sample included pig manure, chicken manure and straw-derived material. The customer's main separation objective was liquid clarity, followed by the dryness of the discharged solids.
Why this sample needed a material-specific trial
The original report describes a viscous brown mixture that settled poorly and had a pronounced fermentation odour. Its behaviour illustrates why equipment should be selected using representative feed rather than the general label "manure". Fibres, fine particles, viscosity and fermentation conditions can all affect handling and separation.

Original photograph from the customer-sample manure dewatering trial.
What the trial evaluated
The reported test separated most of the solid phase and collected samples from the liquid and solids outlets. Further sample testing assessed moisture in the discharged solids and residual solids in the liquid. The company reported that the results met the customer's requirements, but the article did not provide a complete numerical performance dataset.
These results relate to the tested material. They should not be treated as a guaranteed outcome for another farm, feedstock mixture or operating scale.
Measurements to request for scale-up
- Feed dry solids and a clear description of how the sample was prepared.
- Measured feed rate and the operating conditions used during the trial.
- Cake dry solids, liquid suspended solids and solids recovery.
- Energy and chemical consumption where applicable.
- Cleaning, wear, odour management and downstream storage requirements.
Separation does not establish fertilizer suitability
A centrifuge divides material into solid-rich and liquid-rich streams. It does not by itself remove pathogens, dissolved nutrients or all contaminants. Any land application, irrigation or fertilizer use needs separate evaluation against the receiving process and local requirements.
The original SENZ trial video provides additional context for the demonstration. SENZ is a centrifuge manufacturer and supplier in China; our factory team can review your feed and test objectives. View the manure decanter centrifuge or request a sample evaluation.













