Jinhua Shenzhou Centrifuge Co., Ltd. is one of the leading manufacturers and suppliers of drilling mud decanter centrifuge in China. Please feel free to wholesale customized drilling mud decanter centrifuge at competitive price from our factory. For more cheap products, contact us now.
Drilling Mud Separation for a Defined Solids-Control Duty
A drilling mud decanter centrifuge separates suspended solids from drilling fluid in a rotating solid bowl. A scroll conveys settled material toward the solids outlet while liquid leaves through a separate outlet. The equipment is selected as part of a mud-treatment system, with a clear plan for collecting, returning or disposing of each stream.
Barite Recovery and Fine-Solids Removal Are Different Objectives
In a weighted-mud application, the objective may be to recover a useful weighting-material fraction. In another duty, the priority may be reducing unwanted drilled solids in the liquid. These tasks require different separation targets and outlet routing. They should not be treated as one automatic result of increasing bowl speed.
Provide the mud composition and identify the material to retain or reject. Evaluate the quality of both outlets before deciding which stream can return to the active mud system.
What Determines Separation Performance?
- Mud properties: density, viscosity, solids concentration and the type of drilling fluid.
- Particle distribution: size and density of weighting material and drilled solids.
- Feed rate: both hydraulic flow and solids loading must be considered.
- Operating configuration: bowl speed, differential speed and liquid level affect the result.
- System arrangement: upstream equipment and downstream collection determine how the separated streams are used.
The original page mentions removal in a 2–7 micrometre range. This is not a universal cut-point guarantee. Establish the required separation result through a review of the actual mud and representative testing.
LW450 and LWD-Series Reference Data
The original description identifies LW450×1000 and lists 45–60 m³/h, a 37 kW main motor, 7.5 kW auxiliary motor and 3,800 kg weight. Its separate LWD450×1000 table lists 50 m³/h, 30 kW and 2,700 kg. These are conflicting reference entries; confirm the exact model and configuration in the quotation before using them for design.
| Model | LWD450*1000 | LWD450*1250 | LWD355*1250-1 | LWD355*1250-2 |
| Bowl diameter | 450mm | 450mm | 355mm | 355mm |
| Bowl Length | 1000mm | 1250mm | 1250mm | 1250mm |
| Bowl speed | 3000rpm | 3200rpm | 3200rpm | 3200rpm |
| Max Capacity | 50M3/H | 50M3/H | 40M3/H | 40M3/H |
| G-Force |
1220 |
2035 | 2035 | 2035 |
| Gear box speed |
40r/min |
30r/min | 30r/min | 30r/min |
| Gear box ratio | 35:1 | 57:1 | 57:1 | 57:1 |
| Main motor power | 30kw | 37kw | 30kw | 37kw |
| Auxiliary motor | 7.5KW | 7.5KW | 7.5KW | 7.5KW |
| Weight | 2700kg | 3200kg | 2900kg | 3200kg |
| Dimension | 2750x1580x2100mm | 2600*1860*1750mm | 2600*1620*1750mm | 2600*1620*1750mm |
The original table is retained for model comparison, excluding the unverified certification row. Confirm speed and G-force consistency, capacity basis, differential-speed arrangement, dimensions and motor ratings against the final equipment specification. Reference capacity is not guaranteed throughput for every mud.
Controls, Wear Protection and Site Requirements
Specify the required variable-speed control, monitoring, alarms and interlocks with SENZ. Abrasive solids influence the selection of wear protection and maintenance intervals. Review feed-pump control, discharge handling and access for inspection as part of the installation.
If the site requires equipment for a classified hazardous area, state the applicable classification and request documentation for the exact supplied assembly. A generic product description does not establish certification. Foundation, anchoring, lifting and operating procedures must follow the confirmed drawings and model-specific manual.
Data for a Drilling-Fluid Enquiry
- Mud type, density, viscosity and solids composition.
- Normal and peak flow, solids loading and operating schedule.
- Weighting-material recovery or fine-solids removal objective.
- Required outlet quality and proposed return/disposal routes.
- Upstream treatment equipment, feed pump and available tank arrangement.
- Electrical supply, site classification and installation constraints.
Frequently Asked Questions
Does the centrifuge remove only unwanted solids?
No. Separation depends on physical properties and operating conditions. Useful weighting material can also be affected, so both outlet streams should be assessed against the intended duty.
Can maximum flow be used for heavy mud?
Not automatically. Mud density, viscosity and solids load can limit usable throughput. Confirm performance for the actual feed rather than using a general maximum rating.
Is this an oil-water separator?
This page describes solid-liquid drilling-mud separation. Separating two liquid phases and solids requires a specifically selected arrangement and should not be assumed from the decanter name.
How should settings and maintenance be determined?
Use the instructions for the supplied machine and the agreed process conditions. Generic web-page settings and fault-reset procedures are not a substitute for the equipment manual or qualified service support.
Discuss a Mud Solids-Control Project
Send SENZ your mud data and separation objective. For installation planning and broader oilfield duties, see our oilfield centrifuge page.
Equipment and Production Gallery




Hot Tags: drilling mud decanter centrifuge, drilling fluid solids control, barite recovery centrifuge










