Quick Answer: Multi-disc screw presses (also called multi-disk, volute, or multi-plate screw presses) are slow-speed sludge dewatering machines used mainly at small and mid-size wastewater plants and in food, chemical, and biogas industries. The global field includes Japanese-origin designs such as AMCON's Volute and the Esmil–Tsurumi MDQ, and a large group of Chinese makers including Jorsun, Benenv, Kintep, Yixing Pioniere, and Shenzhou. No single brand fits every sludge, so test on your own material before you buy.
What is a multi-disc screw press?
A multi-disc screw press dewaters sludge between stacked rings: fixed rings alternate with moving rings, and a slowly rotating screw shaft passes through them. The shaft carries sludge from a concentration section at the inlet to a dewatering section at the outlet. The gap between the rings and the pitch of the screw both shrink along the way, so pressure builds gradually and filtrate escapes through the ring gaps. Because the moving rings sweep the gaps as the shaft turns, the machine cleans itself continuously.
This design explains the typical selling points: low speed and low power, low noise, small footprint, automatic and unattended operation, and good tolerance of oily or sticky sludge that would blind a belt filter. The trade-offs are lower throughput per unit than a decanter centrifuge on large flows, and cake dryness that depends strongly on sludge type and polymer conditioning.
Note that a multi-disc press is a different machine from a conventional single-screw press with a cylindrical wedge-wire basket. Those are covered briefly at the end.
How this list was built
There is no independently audited ranking of multi-disc screw press makers. This is not a ranked list; companies appear alphabetically. They were selected because they are named in market research reports on multi-disc or screw press sludge dehydrators, or because they publish a clearly defined multi-disc product line. Descriptions rely on each company's own public statements, which we have not independently verified. For several companies we found only limited public detail, and we say so.
Disclosure: this article is published by Jinhua Shenzhou Centrifuge Co., Ltd., which makes the SZ series multi-disc screw press and appears on the list. We describe every company, including ourselves, in the same plain terms. Please verify details directly with each manufacturer before buying.
1. AMCON
Best known for: The Volute dewatering press, a multi-disc design offered in several series (for example the EC series). AMCON is named in multiple market research reports as a key multi-disc screw press player.
Note: We found limited public detail on the company itself beyond its product lines. Request a company profile and references.
Fits when: You want a long-established volute-type design and are willing to evaluate AMCON's installed base.
2. Benenv
Company: Jiangsu Benenv Environmental Technologies Co., Ltd., China
Best known for: The MDS series multi-disk screw press (models such as MDS352 to MDS404) in SS304 or SS316L, used in municipal, industrial, and food-processing wastewater. The company also supplies dissolved air flotation and sludge drying systems.
Fits when: You want a Chinese manufacturer that can supply pretreatment and sludge drying alongside the press.
3. Esmil Group
Best known for: The MDQ multi-disc screw press, offered with Tsurumi Manufacturing. According to the company, a unit can be fitted with up to six dewatering drums and, depending on sludge, reach roughly 18 to 40% dry solids in the cake. It supplies standard packages with feed pump, polymer unit, and conveyor, as well as trailer-mounted mobile systems and equipment rental. It lists references in municipal, biogas, chemical, and food applications.
Fits when: You want a multi-drum configuration with flexible capacity, or a mobile or rental option.
4. Jorsun
Company: Shanghai, China, established 2004
Best known for: The JMDS multi-disk screw press, which the company says handles low-concentration and oily sludge. It states CE and ISO 9001 certification and exports in standard containers.
Fits when: You want an established Chinese specialist with a dedicated multi-disk line.
5. Kintep
Company: Kintep (China)
Best known for: Multi-disk screw presses marketed for food and beverage wastewater sludge, and named in market research on multi-disc dehydrators.
Note: We verified limited detail. Ask for references in your industry.
Fits when: Your sludge comes from food or beverage processing.
6. Ryuki Engineering
Best known for: Named alongside Esmil, Tsurumi, and AMCON as a key global player in multi-plate screw press dehydrators in market research.
Note: We found limited public detail. Request documentation directly.
Fits when: You are building a broad shortlist and want to include Japanese-linked suppliers.
7. Shenzhou
Company: Jinhua Shenzhou Centrifuge Co., Ltd., Zhejiang, China, founded 1980
Best known for: The SZ series sludge dewatering press, which the company describes as small, light, energy-saving, and low-power, aimed at small and mid-size sewage plants, township plants, and treatment stations. The range spans models from SZ-101 to SZ-404, with listed dry solids capacities from about 5 to 640 kg/h, and a vehicle-mounted version for septic and field use. The company also makes decanter centrifuges, flocculant preparation units, and complete sludge dewatering systems, and states ISO 9001 and CE certification and exports to more than 70 countries.
Fits when: You want a cost-competitive press that can be combined with a polymer unit, conveyor, or a decanter in one package from a single supplier, and you are prepared to verify references and local compliance.
8. Tsurumi Manufacturing
Company: Japan
Best known for: A pump manufacturer that co-markets the MDQ multi-disc screw press with Esmil.
Fits when: You value a Japanese-brand supplier and the MDQ platform.
9. Ecologix Environmental Systems
Best known for: Named in market research as a screw press sludge dehydrator supplier.
Note: We found limited public detail. Request references and test data.
Fits when: You are comparing North American and global suppliers and want one more option to check.
10. Yixing Pioniere
Company: Yixing, Jiangsu, China, established 2012
Best known for: Specializing in multi-disc sludge dewatering equipment and related wastewater treatment systems.
Fits when: You want a supplier whose business is centered on multi-disc presses.
Side-by-Side Overview
| Manufacturer | Base | What We Could Verify | Typical Fit |
|---|---|---|---|
| AMCON | Not verified | Volute press, named in market research | Evaluate references |
| Benenv | China | MDS series, SS304/316L, DAF and drying | Pretreatment plus press |
| Esmil Group | Not verified | MDQ up to six drums, mobile and rental | Flexible capacity |
| Jorsun | China (Shanghai) | JMDS, est. 2004, CE and ISO 9001 stated | Low-concentration, oily sludge |
| Kintep | China | Food and beverage focus | Food wastewater |
| Ryuki Engineering | Not verified | Named in market research | Verify directly |
| Shenzhou | China | SZ series 5–640 kg/h DS, mobile unit | Small and mid-size plants |
| Tsurumi Manufacturing | Japan | Pump maker, MDQ partner | MDQ platform |
| Ecologix | Not verified | Named in market research | Verify directly |
| Yixing Pioniere | China | Multi-disc specialist, est. 2012 | Multi-disc focus |
Screw press makers often compared, but not multi-disc
Two well-known manufacturers sell conventional screw presses rather than multi-disc designs, and they frequently appear in the same bid lists. Huber (Germany) offers the Q-PRESS, in which sludge conditioned with flocculant is pumped into a cylindrical wedge-wire filter basket where a slow-rotating auger works the material, in sizes from small to large. Vincent Corporation (United States) has designed and built dewatering screw presses since 1931. ANDRITZ also supplies screw presses. If you compare a multi-disc press against these, test them on the same sludge.
How to Choose a Multi-Disc Screw Press Supplier
- Define the sludge. Type (waste activated, digested, oily, food), solids concentration, and fiber or hair content all affect performance.
- Size by dry solids. Multi-disc press capacity is normally quoted in kg of dry solids per hour at a stated feed concentration. Compare machines at the same concentration, and remember that capacity falls as feed gets thicker.
- Ask for a test. Bench or pilot results with your sludge should show cake solids, polymer dose, and solids capture.
- Check the construction. Look at ring and screw materials (SS304 or SS316L), wear parts, and how easily rings can be replaced.
- Review wash water and automation. Rinse water consumption and the control system affect running cost and labor.
- Confirm the supporting package. Polymer preparation, feed pump, flow meter, and conveyor are usually part of the system.
- Plan for service. Ask about spare rings, screws, and motors, and who provides commissioning.
- Compare total cost. Include polymer, power, wash water, maintenance, and disposal of the cake.
FAQ
What is the difference between a multi-disc and a conventional screw press?
A multi-disc press uses stacked fixed and moving rings that clean themselves as the shaft rotates. A conventional press uses a cylindrical wedge-wire basket and a screw. Multi-disc designs are often chosen for oily, sticky, or low-concentration sludge.
How dry a cake can a multi-disc screw press produce?
It depends on sludge type and polymer. One manufacturer states roughly 18 to 40% dry solids depending on sludge. Treat any figure as a vendor claim until you test on your sludge.
Is a multi-disc screw press better than a decanter centrifuge?
Not universally. Screw presses use less power and run quietly with simple operation, which suits smaller plants. Decanters handle larger flows in a smaller footprint and often give a drier cake on difficult sludges.
What sludge is best suited?
Low to medium concentration sludges, including oily and sticky ones, common in food processing, petrochemical, and municipal plants.
Can it be mounted on a truck?
Yes. Several suppliers, including Esmil and Shenzhou, offer mobile or vehicle-mounted systems.
---
Send us your sludge type, flow, and solids concentration and our application engineers will recommend a press or decanter configuration and a budgetary quote you can compare with other suppliers.














