Jinhua Shenzhou Centrifuge Co., Ltd. is one of the leading manufacturers and suppliers of industrial centrifuge machine in China. Please feel free to wholesale customized industrial centrifuge machine at competitive price from our factory. For more cheap products, contact us now.
Industrial Decanter Centrifuge Selection
The industrial centrifuge machine on this page is an LW-series horizontal scroll decanter, with LW650 listed as the reference model family. It separates suspended solids from liquid through centrifugal sedimentation and discharges collected solids using a scroll. The machine should be selected around a defined process duty and representative feed data.
Choose the Separation Objective First
| Duty | Main target | What to assess |
|---|---|---|
| Dewatering | Reduce liquid retained in discharged solids | Cake consistency, solids capture and discharge handling |
| Thickening | Increase solids concentration for a later process stage | Outlet concentration, pumpability and solids recovery |
| Clarification | Reduce suspended particles in the liquid outlet | Liquid quality, fine-particle carryover and flow |
These objectives can compete with one another. A setting that improves one outlet may change the other outlet or reduce throughput. Define acceptance criteria for both streams before comparing equipment.
Compare the Listed LW650 Configurations
The original reference data lists LW650*1950 and LW650*2600 configurations. Both have a listed bowl diameter of 650 mm. LW650*1950 is listed with a 1,950 mm length, 2,200 r/min maximum speed and 75 kW main motor. LW650*2600 is listed with a 2,600 mm length, 2,000 r/min maximum speed and 90 kW main motor.
These are reference configurations, not a recommendation to operate at maximum speed. Required capacity, solids loading, separation behavior and installation requirements determine the appropriate selection. Confirm all dimensions, ratings and supplied components in the project specification.
Feed Properties and Operating Controls
Particle size, density difference, solids concentration and liquid viscosity influence separation. Variable feed can also change scroll loading and outlet quality. Review bowl speed, differential speed, feed rate and liquid level together during process evaluation.
Discuss the required drive and control arrangement with SENZ, including VFD, PLC and operator interface requirements. Specify which measurements, alarms and interlocks are required for the installation. Material selection, wear protection, cleaning access and maintenance space should be based on the actual service conditions.
LW-Series Reference Specifications
The existing specification table is retained for preliminary comparison. Listed flow ranges are reference values and do not establish guaranteed capacity for every material. Use a confirmed equipment drawing and quotation for final project planning.
|
Model |
Diameter |
Length |
Max Speed |
L/D ratio |
G-force |
Capacity |
Main motor power |
Weight |
Dimension (L*W*H) |
|
(mm) |
(mm) |
(r/min) |
(g) |
(m3/h) |
(kw) |
(kg) |
(mm) |
||
|
LW250*720 |
250 |
720 |
5000 |
3 |
3360 |
0.3-1.8 |
7.5 |
850 |
1915*1250*680 |
|
LW250*960 |
250 |
960 |
4500 |
4 |
2722 |
0.5-5 |
7.5 |
950 |
2120*1250*680 |
|
LW300*900 |
300 |
900 |
4200 |
3 |
2964 |
1-6 |
11 |
1160 |
2150*1300*900 |
|
LW300*1200 |
300 |
1200 |
4000 |
4 |
2784 |
2-6 |
11 |
1350 |
2450*1300*900 |
|
LW355*1160 |
355 |
1160 |
3600 |
3.3 |
2576 |
2-8 |
15 |
1400 |
2470*1350*830 |
|
LW355*1460 |
355 |
1460 |
3600 |
4 |
2576 |
2-10 |
15 |
1800 |
2750*1350*830 |
|
LW400*800 |
400 |
860 |
3200 |
2.2 |
2294 |
2-8 |
15 |
1600 |
2270*1480*980 |
|
LW400*1200 |
400 |
1200 |
3200 |
3 |
2294 |
3-12 |
18.5 |
1800 |
2730*1600*1080 |
|
LW400*1600 |
400 |
1600 |
3000 |
4 |
2016 |
3-15 |
22 |
2000 |
3130*1600*1080 |
|
LW450*1350 |
450 |
1350 |
3000 |
3 |
2268 |
4-20 |
30 |
2000 |
2870*1700*1130 |
|
LW450*1800 |
450 |
1800 |
2800 |
4 |
1976 |
4-25 |
37 |
2500 |
3320*1700*1130 |
|
LW500*1250 |
500 |
1250 |
2800 |
2.5 |
2195 |
5~25 |
37 |
2500 |
2770*1800*1170 |
|
LW500*1500 |
500 |
1500 |
2800 |
3 |
2195 |
5~30 |
37 |
2680 |
3020*1800*1170 |
|
LW500*2000 |
500 |
2000 |
2500 |
4 |
1750 |
5-35 |
45 |
4000 |
3520*1800*1170 |
|
LW530*1855 |
530 |
1855 |
2600 |
3.5 |
2006 |
5-38 |
55 |
4680 |
3885*1350*1600 |
|
LW530*2120 |
530 |
2120 |
2400 |
4 |
1709 |
5-40 |
55 |
4800 |
4150*1350*1600 |
|
LW550*1855 |
550 |
1855 |
2600 |
3.5 |
2006 |
5-35 |
55 |
2680 |
3885*1350*1600 |
|
LW550*2120 |
550 |
2120 |
2400 |
4 |
1709 |
5-40 |
55 |
4000 |
4150*1350*1600 |
|
LW650*1950 |
650 |
1950 |
2200 |
3 |
1761 |
6-45 |
75 |
5000 |
4840*1510*1720 |
|
LW650*2600 |
650 |
2600 |
2000 |
4 |
1456 |
6-65 |
90 |
6000 |
5490*1510*1720 |
|
LW720*2160 |
720 |
2160 |
2000 |
3 |
1612 |
7-80 |
120 |
6000 |
5200*1600*1800 |
|
LW720*2880 |
720 |
2880 |
2000 |
4 |
1306 |
7-90 |
120 |
8000 |
3100*1600*1800 |
|
LW760*2280 |
760 |
2280 |
2200 |
3 |
2060 |
10-90 |
110 |
10000 |
4892*1950*1610 |
|
LW760*3040 |
760 |
3040 |
2000 |
4 |
1702 |
10-120 |
132 |
12500 |
5652*1950*1610 |
|
LW800*2400 |
800 |
2400 |
1800 |
3 |
1451 |
20-100 |
150 |
12000 |
5820*2000*1300 |
|
LW800*3200 |
800 |
3200 |
1800 |
4 |
1451 |
20-120 |
150 |
13000 |
7100*2000*1300 |
Data to Include in Your Enquiry
- Material name, process description and required separation duty.
- Normal and peak flow, solids concentration and operating hours.
- Particle-size information, density, viscosity, pH and temperature.
- Required liquid quality and solids discharge condition.
- Relevant corrosive or abrasive constituents and cleaning requirements.
- Power supply, layout, upstream feed system and downstream equipment.
- Sample availability and the acceptance criteria for a trial.
Frequently Asked Questions
Is this a disc-stack or basket centrifuge?
No. This page describes a horizontal scroll decanter. Other centrifuge designs have different feed and discharge arrangements and should be evaluated separately.
Can this machine separate two liquids and solids?
A standard solid-liquid duty and a liquid-liquid-solid duty require different configurations. If two immiscible liquid phases must be separated, review a suitable three-phase decanter instead of assuming the listed LW configuration can perform that duty.
Should I select by the highest listed flow rate?
No. Nominal hydraulic flow alone does not account for solids load or required outlet quality. Representative testing and a process review are needed to establish a suitable operating range.
Is the same configuration suitable for food, chemicals and sludge?
Not automatically. Contact materials, seals, cleaning arrangements, containment and documentation must be matched to the specific application.
Discuss an Industrial Separation Project
Send SENZ your feed properties and acceptance targets for equipment selection. For more specific duties, see our sludge dewatering decanter, clarifying decanter and three-phase centrifuge.
Equipment and Production Gallery



Hot Tags: industrial centrifuge machine, LW650 decanter centrifuge, industrial solid liquid separation, Lw Continuous Decanter Centrifuge, Paint Sludge Dewatering centrifuge, waste oil purifier centrifugal, Petroleum residue separation equipment, solid liquid separation, industrial sewage treatment centrifuge













