Jinhua Shenzhou Centrifuge Co., Ltd. is one of the leading manufacturers and suppliers of Decanter Centrifuge for Sludge Dewatering in China. Please feel free to wholesale customized Decanter Centrifuge for Sludge Dewatering at competitive price from our factory. For more cheap products, contact us now.
Continuous Sludge Dewatering with the LW355 Decanter
The SENZ decanter centrifuge for sludge dewatering separates a sludge feed into a solids-rich cake and a liquid stream, often called centrate. The LW355 range listed here includes two bowl lengths: LW355*1160 and LW355*1460. Both use continuous feeding and scroll discharge, allowing integration with sludge feed pumps and downstream cake handling.
Choosing between these models requires more than comparing flow rates. Feed solids, sludge composition, conditioning and the required separation result determine the suitable operating duty.

How Sludge Separation Works
Inside the rotating bowl, centrifugal force moves denser suspended solids toward the bowl wall. A scroll rotating at a different speed conveys the settled solids toward the solids outlet, while separated liquid exits through the liquid outlet. Bowl speed, differential speed, feed rate and conditioning must be matched to the sludge.
This page focuses on two-phase solid-liquid sludge separation. A duty requiring separation of two liquid phases should be assessed separately rather than assumed to use the same configuration.
Sludge Applications to Evaluate
- Municipal sewage sludge requiring volume reduction before handling or disposal.
- Industrial wastewater sludge, subject to review of chemical composition and materials compatibility.
- Mining wastewater solids and dredging slurry, where abrasive particles and solids loading require particular attention.
The suitability of each feed should be assessed using representative samples and the project's target cake dryness, solids recovery and centrate quality.



LW355 Model Specifications
The existing model data below provide a starting point for selection. LW355*1160 has a listed L/D ratio of 3.3, while LW355*1460 has a listed ratio of 4. Maximum speed is an equipment limit, not a recommended speed for every sludge. Capacity ranges are reference figures; confirm throughput and supplied dimensions for the proposed duty.
|
Model |
Diameter |
Length |
Max Speed (R/Min) |
L/D Ratio |
G-Force (G) |
Capacity |
Main Motor Power |
Weight |
Dimension |
|
(Mm) |
(Mm) |
(M3/H) |
(KW) |
(Kg) |
(Mm) |
||||
|
LW355*1160 |
355 |
1160 |
3600 |
3.3 |
2576 |
2-8 |
15 |
1400 |
2470*1350*830 |
|
LW355*1460 |
355 |
1460 |
3600 |
4 |
2576 |
2-10 |
15 |
1800 |
2750*1350*830 |
Materials, Wear Protection and Drive Options
Contact materials must be specified for the actual sludge chemistry. Existing product information lists stainless steel options including 304/316 and a duplex bowl configuration; the supplied material grade must therefore be stated in the quotation rather than assumed to be identical across all models.
Listed wear-protection features include carbide protection on the scroll and replaceable protection at discharge points. Confirm the wear package, bearings, motor, power supply and control-panel specification for the selected model. Abrasive feeds may require a different maintenance plan from biological sludge.


Information Needed for Sizing
- Sludge source and whether the feed is biological, mineral or mixed.
- Normal and peak feed flow, dry solids concentration and daily operating hours.
- Temperature, pH, viscosity and abrasive or corrosive components.
- Required cake dryness, solids capture and centrate quality.
- Existing polymer use, feed-test results and downstream handling requirements.
For conditioned sludge, consider the automatic flocculant dosing system as part of the process review. If the project requires a hydraulic drive arrangement, see the hydraulically driven decanter centrifuge.
Frequently Asked Questions
What cake dryness can the LW355 achieve?
There is no single cake-dryness value applicable to every sludge. Feed composition, conditioning and operating settings influence the result. Provide representative sludge data and define the target before requesting a performance assessment.
Does every sludge require polymer dosing?
No. Conditioning needs depend on the sludge and separation target. Tests can help determine whether polymer is needed and establish a suitable preparation and dosing approach.
How should the two LW355 models be compared?
Compare bowl length, reference capacity, footprint and mass alongside the feed duty. The longer model's listed capacity does not guarantee the same output on a different sludge or at a different cake-quality target.
Can this centrifuge replace an existing sludge press?
That requires a process comparison covering feed conditions, separation results, utilities, conditioning, operator requirements and downstream equipment. Send the current operating data so the replacement duty can be reviewed.
Request a Sludge Dewatering Assessment
Send SENZ your sludge analysis, required flow rate and cake-handling requirements. Request a model recommendation and quotation based on your process.
Hot Tags: Decanter Centrifuge for Sludge Dewatering, sludge dewatering centrifuge, LW355 decanter centrifuge, Ceramic sludge dewatering machine, Solid Liquid Separation Centrifuge, Sugar Separation Centrifug, large capacity solid liquid separation equipment, industrial wastewater treatment equipment, centrifuge filter machine








