A gluten–wheat separation layout needs space for the actual wet-process line and its service activities, not just the centrifuge footprint.
Define the supplied process scope
Confirm whether the supply includes mixing, a decanter, washing screens, pumps or other equipment. Wet gluten–starch separation is not equivalent to dry flour sieving. Hydration tanks, product streams and cleaning circuits can occupy significant space beyond the separator itself.
Use dimensioned service drawings
Request installed dimensions, cover movements, rotor withdrawal paths and lifting loads. Do not use generic front, side or overhead clearances as acceptance criteria. Include hygienic access, drainage falls and cleaning of adjacent surfaces, avoiding locations that create inaccessible product traps.
Coordinate dry and wet areas
Review flour intake dust separately from the wet separation stage, including the applicable dust-control assessment. Define water quality, effluent handling, electrical working space and ventilation from the actual process. Ensure product-contact equipment is dedicated and suitable for food service. Approve the complete layout and maintenance route before finalizing the building arrangement.

SENZ food-processing centrifuge illustration; the exact configuration depends on the application.
Review checklist
| Item | Check |
|---|---|
| Process | List every supplied and site-provided unit |
| Service | Verify removal and lifting envelopes |
| Hygiene | Plan cleaning, drains and dry-area dust controls |
Frequently asked questions
Can footprint alone establish room size?
No. Maintenance and supporting process equipment also need space.
Are all wheat separators dry machines?
No. Industrial gluten–starch separation commonly uses wet processing.
Can another product's clearance be copied?
No. Use drawings for the exact supplied configuration.
Related reading
For a SENZ application review, contact our team with the feed characteristics, equipment model and performance requirements.






