Investigate abnormal sewage decanter vibration through alarm history, feed changes and qualified mechanical inspection before a controlled return to service.
Respond to the abnormal condition
Use the model-specific alarm and shutdown procedure when vibration rises unexpectedly, a trip occurs or severe noise develops. Do not bypass interlocks or repeatedly restart a tripping machine. Keep clear of rotating equipment and wait for verified standstill, isolation and release of stored energy before intrusive inspection.
Preserve evidence before changing settings
Record the alarm code, speed, load, torque, vibration trend, temperature and time of onset. Note whether the change followed startup, cleaning, a feed upset or maintenance. Compare with a healthy baseline at similar operating conditions. A single vibration number does not identify a failed bearing, and universal trip thresholds should not replace the limits for the installed machine.
Separate process and mechanical causes
Qualified personnel should review deposits, uneven solids distribution, foreign objects, wear, drive alignment, supports and bearings using the approved inspection method. Check feed consistency and upstream pumping records. Do not attempt field balancing, bowl repair, high-pressure cleaning or chemical addition based on a generic troubleshooting list.
Verify the repair and restart
Document the identified cause, corrective work and inspection findings. A controlled restart must follow the manufacturer's procedure with guards and protective devices functional. Compare the new trend with the baseline and check separation performance. Stop and escalate recurring symptoms rather than hiding them with a higher alarm limit.


Equipment reference images; configuration and duty require confirmation.
Practical review checklist
| Check | Evidence to record |
|---|---|
| Event history | Alarm, speed, torque, vibration and feed at onset |
| Inspection | Deposits, wear, drive and support findings after safe isolation |
| Release to service | Authorized corrective work and stable restart trend |
Frequently asked questions
Should a vibration trip simply be reset?
No. Identify the cause and follow the required release-to-service procedure.
Can operators balance a damaged bowl in place?
Bowl assessment and balancing require qualified specialist service.
Related guidance
- How to reduce the maintenance cost of a sludge decanter centrifuge?
- Stable Sludge Dewatering: Feed, Controls and Maintenance
Contact SENZ with the equipment model, feed characteristics and operating targets to request an application review and the relevant technical documentation.






