Jinhua Shenzhou Centrifuge Co., Ltd. is one of the leading manufacturers and suppliers of dewatering press machine in China. Please feel free to wholesale customized dewatering press machine at competitive price from our factory. For more cheap products, contact us now.
Multi Disc Screw Press Dewatering
Product Details
Shenzhou multi-disk screw press solves the technical problems of previous generations of sludge dehydration equipment, such as easily blocked, unable to deal with low concentration sludge and oily sludge, high energy consumption, complex operation, etc., and achieves the dehydration goal of high efficiency and energy saving. Under the condition of fully automatic operation, the dehydrator can realize high-efficiency flocculation, continuously complete sludge thickening and pressing dehydration, and finally return or discharge the collected filtrate.
It is widely used in municipal sewage treatment engineering and water treatment system of food, starch, oil, pharmaceutical, chemical, paper, leather and other industries etc.
Working Principle
The initial section of dewatering drum is the Thickening Zone, where the solid-liquid separating process takes place and where the filtrate will also be discharged. The pitch of the screw and the gaps between the rings decrease at the end of dewatering drum, hence increasing its internal pressure. At the end, the End Plate further increases the pressure, so as to discharge dry sludge cake.
Product Structure
The SZ series sludge dewatering press is mainly composed of metering tank, flocculation mixing tank, mixing device, dehydration main body, filtrate tank, motor, electric control cabinet and support.The water inlet and outlet on the equipment are all configured with flanges to facilitate on-site pipeline connection.
Products Details
Screw Body
Mainly composed of fixed annular plates and moveable annular plates. Adopting Wearable material to keep the service life longer. Thickening and dewatering of the sludge can be finished in one canister.
Mixing Reducer
Using first-class reducers, Nord or SEW are optional due to your actual needs. To ensure the sludge and polymer fully mixed. Excellent performance to keep the long lifespan. Liquid level adjusting device is assembled to adjust sludge inletting amount.
Screw Reducer
Using first-class reducers, Nord or SEW are optional due to your actual needs. Power source of the equipment. Superior performance with protection grade of IPSS and insulation grade of F. Frequency conversion starting and speed control to avoid the impact of the load.
Electric Control Panel
Frequency converting controls dewatering body. Controls polymer mixing device. Realize the switch of automatic operation and manual operation.
Main Feature
1. Jam Resistance
Low volume of flush water required so as to save the water cost and lower the internal circulation burden caused by the flush water.
2. Less Covering Space
Electric control panel, flocculation Mixing tank and the dewatering body are integrated as one. So as to save the covering space which makes the installing much easier.
3. Better Working Environment
This equipment adopts closed operation mode. It treats the sludge stably and in time. The advantage of reducing the smell on spot provides a better working environment for the workers.
4. Easy to Operate, Easy to Maintain
Realize automatic operation for 24hours so as to release the operation staff from heavy labor. And the design is convenient for daily maintenance.
5. Cost Saving
The screw shaft operates in low speed which consumes little power. Vibration or noise are both hardly existed on spot.
Application
● Sludge Dewatering: It efficiently removes water from sludge, reducing its volume for easier disposal or further processing.
● Wastewater Treatment: It aids in the separation of solid and liquid phases in wastewater, enabling effective treatment and clean water discharge.
● Industrial Waste Management: It helps in the dewatering and solid-liquid separation of various industrial wastes, promoting efficient waste management practices.
● Resource Recovery: By extracting water from solid waste, the machine facilitates the recovery of valuable resources present in the waste stream.
Specification
Standardized Production
FAQ
1. who are we?
We are based in Zhejiang, China, start from 2007,sell to Domestic Market(15.00%),Africa(10.00%),Mid East(10.00%),Western Europe(8.00%),South America(6.00%),North America(5.00%),Oceania(5.00%),Northern Europe(3.00%), Eastern Asia(2.00%),South Asia(2.00%),Eastern Europe(1.00%), Southeast Asia (1.00%), Southern Europe(1.00%). There are total about 100 people in our office.
2. how can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;
3.what can you buy from us?
Decanter centrifuge,Screw sludge dewatering machine,Three-phase centrifuge,Shaftless screw conveyor,Automatic Polymer Dosing System
4. why should you buy from us not from other suppliers?
With more than 40 years of production history, the products have gone abroad, Long-term cooperation with institutions of higher learning. we have the product design and development capabilities of LW series centrifuges, and have obtained national patents.
5. what services can we provide?
Accepted Delivery Terms: Express Delivery；
Accepted Payment Currency:USD,EUR,JPY,CAD,AUD,HKD,GBP,CNY,CHF;
Accepted Payment Type: T/T,Credit Card,PayPal,Western Union;
Language Spoken:English,Chinese
Hot Tags: dewatering press machine, China dewatering press machine manufacturers, suppliers, factory, SZ Series Sludge Dewatering Press, Screw Press Sludge Dewatering
