Jinhua Shenzhou Centrifuge Co., Ltd. is one of the leading manufacturers and suppliers of oil sludge decanter centrifuge in China. Please feel free to wholesale customized oil sludge decanter centrifuge at competitive price from our factory. For more cheap products, contact us now.
LWS Three-Phase Decanters for Oil Sludge Separation
An oil sludge decanter centrifuge separates suitable oily feed into a solids discharge and two liquid streams. The LWS range described here is evaluated for oil-water-solids separation. The attainable recovery and outlet quality depend on feed properties, preparation and the selected configuration.
Characterize the Sludge Before Sizing
Identify the source of the sludge and variation between batches. Provide oil, water and solids proportions, viscosity at the planned temperature, density differences, particle information and abrasive contaminants. Describe emulsion behavior and any chemicals already present in the feed.
Screening, mixing or conditioning may be needed before centrifugal separation. Establish any heating or chemical treatment through feed evaluation and equipment limits. Stable emulsions should not be assumed to separate completely in a centrifuge.
How Three-Phase Separation Works
Inside the rotating bowl, denser solids settle toward the wall and are conveyed to discharge by a scroll moving at a differential speed. The liquid outlet arrangement separates the two suitable immiscible liquid phases. Confirm the interface and outlet configuration for the actual oil and water properties.
The centrifuge is a process stage. Recovered oil may need further polishing, while the water and solids must be assessed for their intended downstream treatment. See the oil sludge treatment plant for complete-system planning.
Reference LWS Model Range
|
Model |
Diameter |
Length |
Max Speed |
L/D ratio |
G-force |
Capacity |
Main motor power |
Weight |
Dimension (L*W*H) |
|
(mm) |
(mm) |
(r/min) |
(g) |
(m3/h) |
(kw) |
(kg) |
(mm) |
||
|
LWS355*1160 |
355 |
1160 |
3600 |
3.3 |
2576 |
2-8 |
15 |
1400 |
2470*1350*830 |
|
LWS355*1460 |
355 |
1460 |
3600 |
4 |
2576 |
2-10 |
15 |
1800 |
2750*1350*830 |
|
LWS450*1800 |
450 |
1800 |
2800 |
4 |
1976 |
4-25 |
37 |
2500 |
3320*1700*1130 |
|
LWS500*2000 |
500 |
2000 |
2500 |
4 |
1750 |
5-35 |
45 |
4000 |
3520*1800*1170 |
|
LWS520*2080 |
520 |
2080 |
3200 |
4 |
3154 |
5-35 |
55 |
5000 |
4510*1410*1170 |
|
LWS550*2000 |
550 |
2000 |
2800 |
4 |
2414 |
6-40 |
55 |
5700 |
4570*1380*1600 |
|
LWS650*1950 |
650 |
1950 |
2200 |
3 |
1761 |
6-45 |
75 |
5000 |
4840*1510*1720 |
|
LWS650*2600 |
650 |
2600 |
2000 |
4 |
1456 |
6-65 |
90 |
6000 |
5490*1510*1720 |
The original model table is retained for preliminary comparison. Reference capacities are volumetric feed ranges, not guaranteed oil-sludge throughput or recovered-oil output. Confirm dimensions, nominal ratios, maximum speed and operating limits in a current datasheet for the proposed machine.
Agree Performance Targets and Test Methods
- Oil recovery: define the amount of oil recovered relative to measured oil entering with the feed.
- Recovered-oil quality: specify acceptable water and solids content for its receiving process.
- Water quality: define oil carryover and remaining solids for downstream treatment.
- Solids discharge: specify residual oil, moisture and handling requirements using agreed analytical methods.
- Throughput: establish normal and peak rates under the same documented feed conditions.
Take representative feed and outlet samples during stable operation. Define test duration, sampling frequency and analytical basis before agreeing a guarantee. Recovery, cake dry solids and volume reduction describe different outcomes and should not be treated as interchangeable measures.
Configuration and Operating-Cost Review
Confirm contact materials, wear protection, drive arrangement, controls, cleaning and maintenance access for the feed. The original range lists stainless-steel and variable-frequency options; the supplied materials and functions must be identified in the proposal.
Assess power, conditioning chemicals, maintenance, wear parts and handling of all three outlets when comparing costs. A fixed disposal-cost reduction cannot be assumed without a project-specific mass balance and operating basis. Required site approvals must be documented for the actual equipment supplied.
For residues from storage tanks, review the tank bottom oil recovery page. For phase-selection questions, see the oil-water separation centrifuge.
Frequently Asked Questions
Is one oil-recovery percentage valid for every sludge?
No. Feed composition, emulsions, preparation and operating conditions affect recovery. Define the target and demonstrate it through a representative trial.
Does the separated oil need further treatment?
It may. Compare measured water and solids content and other required properties with the receiving process specification.
Can a two-phase decanter provide the same outlets?
A conventional solid-liquid decanter does not automatically provide separate oil and water streams. Confirm a three-phase arrangement when all three outlets are required.
What is needed for a model recommendation?
Provide sludge analysis, flow range, operating hours, outlet targets, utilities and installation constraints. Include existing conditioning and sample-test results where available.
Equipment and Delivery Images











Hot Tags: oil sludge decanter centrifuge, LWS three phase centrifuge, oily sludge separation, oil recovery decanter, torque overload device decanter centrifuge, kitchen waste disposal machine, Separation Decanter Centrifuge, centrifuge oil separator, Decanter Centrifuge Separator Of Oil, Centrifuge Separator Of Oil














