sales1@senz-separation.com    +86-82211558
Cont

Have any Questions?

+86-82211558

Flocculant Auto Dosing System

Flocculant Auto Dosing System

PY3 three-tank system for preparing polymer flocculant solution from dry powder. Coordinate powder feeding, wetting, maturation, storage and dosing with the treatment-process requirements.
Send Inquiry

Product Introduction

Jinhua Shenzhou Centrifuge Co., Ltd. is one of the leading manufacturers and suppliers of flocculant auto dosing system in China. Please feel free to wholesale customized flocculant auto dosing system at competitive price from our factory. For more cheap products, contact us now.

 

PY3 Three-Tank Flocculant Preparation and Dosing System

The SENZ PY3 flocculant auto dosing system prepares polymer solution from dry powder using separate mixing, maturation and storage stages. Supplied from China, it can be evaluated for wastewater treatment, sludge conditioning and other processes requiring prepared flocculant solution.

SENZ PY3 flocculant auto dosing system product view

Preparation and Dosing Are Different Duties

Powder is fed from the hopper into the wetting and mixing stage. The solution then receives the required maturation time before storage and delivery to the dosing point. The preparation unit capacity and the dosing-pump duty must both match the process.

Automatic sequencing can coordinate the configured stages, but powder replenishment, inspection, calibration and maintenance still require operator attention. Solution concentration and delivered dose depend on the selected settings, equipment condition and verification procedures.

Published PY3 Model Range

Model Listed preparation capacity Hopper volume Listed power
PY3-500 500 L/h 55 L 1.0 kW
PY3-1000 1,000 L/h 55 L 1.0 kW
PY3-1500 1,500 L/h 110 L 1.0 kW
PY3-2000 2,000 L/h 110 L 3.0 kW
PY3-3000 3,000 L/h 200 L 3.0 kW
PY3-5000 5,000 L/h 350 L 3.0 kW
PY3-8000 8,000 L/h 550 L 3.0 kW

These are published reference values for the preparation equipment, not wastewater-treatment flow ratings. Confirm usable output at the required solution concentration and maturation time. Dosing-pump capacity, pressure and total installed power should be stated for the quoted package.

Inputs Needed for System Selection

  • Polymer product and supplier preparation instructions.
  • Required working-solution concentration and maturation time.
  • Average and peak solution demand and operating schedule.
  • Dosing-point pressure, pipe length and number of dosing points.
  • Available water quality, pressure, temperature and electrical supply.
  • Material compatibility, installation space and control interfaces.

Tank and wetted-component materials must be confirmed in the quotation. Do not assume PP and stainless-steel configurations have the same suitability for every chemical or cleaning condition.

Integrate Preparation with the Treatment Process

For sludge dewatering, establish polymer selection and dose using representative tests. Then size the preparation and delivery system to meet that demand, including peak operation. Verify feeder calibration, water delivery and dosing-pump output as part of commissioning.

When comparing flocculant auto dosing system manufacturers, ask the supplier to identify the feeder, mixing and storage arrangement, dosing pump, level controls and alarms included in the factory package. SENZ can review the process requirements for a configuration proposal.

For the associated treatment stage, see wastewater treatment sludge dewatering. The automatic flocculant dosing system page provides a related equipment overview.

Frequently Asked Questions

Does 1,000 L/h mean the unit treats 1,000 L/h of wastewater?

No. It is the listed preparation capacity for polymer solution. Wastewater or sludge treatment capacity depends on the required chemical dose and the process.

Can the dry-powder system use liquid emulsion polymer without changes?

Do not assume interchangeability. Liquid products can require different storage, activation and feeding arrangements. Specify the polymer form before selection.

Is the dosing pump automatically sized from the preparation capacity?

The pump must meet the required flow range and delivery pressure. Confirm its duty separately, including any downstream dilution or multiple dosing points.

Can one concentration and maturation time suit all polymers?

No. Follow the selected polymer supplier requirements and confirm preparation performance under the plant water and operating conditions.

Hot Tags: flocculant auto dosing system, PY3 polymer preparation unit, three tank flocculant system, China manufacturers, factory, supplier, Mud centrifugal dewatering machine, set of dewatering equipment, Special equipment for sludge dewatering, Mud separator, waste water flocculant, Polymer Dosing System Screw Press

Send Inquiry

(0/10)

clearall