Jinhua Shenzhou Centrifuge Co., Ltd. is one of the leading manufacturers and suppliers of sea salt pusher centrifuge in China. Please feel free to wholesale customized sea salt pusher centrifuge at competitive price from our factory. For more cheap products, contact us now.
HR Series 2 stages Sea Salt Refining Pusher Centrifuge
This two stage pusher centrifuge is used for solid washing,solid liquid separation , the solid can be the kinds ofcrystal/granular /fiber with particle more than 0.004 mm and the concentration > 40% . Widely for NaCI , NH4CI ,KCI ,Ammonium chloride ,and other crystal and granular solution.
Model: HR230N(P23),HR400N(P40),HR500N(P50),HR630N(P60), HR850N(P85),HR1000N(P100)

Description
Compact designComplete automatic
High capacity
Lowest moisture
Washing/dewatering separately
Remote control
Resistant to high and low temperature
Explosion proof is available.

Working Principle
Showing above the diagram,when the basket is rotating at full speed ,the suspension liquid to be separated is fed into the feeding pipe 1 and continuously sent to the distributor 2 . Under the action of centrifugal force, the suspension liquid evenly distributed on the first stage basket screen 3, and most of liquid phase goes through out the screen mesh and the hole of basket,while the solid phase in the form of annular filter cake stays on the screen, when the first stage basket returns and pushes the filter cake moving forward a distance along the basket axial , and when the first stage basket process , the empty surface of screen is filled with the continuous suspension liquid again and forms new filter cake. With the continuous reciprocating movement., and the filter cake pulses forward and further
drying. The filter cake goes into the secondary stage basket from the first stage basket , the filter cake is loose and
redistributed on the secondary stage basket screen and pushed out of the basket ,continuously go into the collecting tank 5 and finally the filter cake moves out of machine from the tangential discharge port by the scraper 4 installed in the secondary stage basket (if not using the scraper, the filter cake will directly drop into the machine casting.
1.Washing Pipe 2 Feeding Pipe3 Machine Casing 4 Second Stage Basket
5 Second Stage Screen 6 First Stage Screen
7 First Stage Basket 8 Bearing Box
9 Hollow Shaft 10 Push Shaft
11 Oil Cylinder 12 Hydraulic Device
13 Vibration Isolation Foundation
14 Main Motor 15 Cooler
16 Oil Tank 17 Push Plate 18 Distributor
19 Scraper 20 Door Cover
Product Specifications
|
Model |
HR230N(P23) |
HR400N(P40) |
HR500N(P50) |
HR630N(P60) |
HR850N(P85) |
|
|
Inner/outer baskets |
Diameter mm |
180/230 |
337/400 |
410/500 |
560/630 |
720/828 |
|
Filter mm |
120/120 |
145/155 |
180/180 |
240/240 |
240/320 |
|
|
G. force |
1306/1669 |
503/894 |
403/715 |
350/114 |
286/145 |
|
|
Speed rpm |
3600 |
1500-2000 |
1200-1600 |
1000-1500 |
1200-1400 |
|
|
Main Motor |
Power kw |
3 |
11 |
37 |
55 |
75 |
|
Back Motor |
Power kw |
3 |
7.5 |
22 |
22 |
37 |
|
Capacity |
t/hr |
0.2-1.5 |
2-5 |
6-12 |
15-18 |
25-35 |
|
Size |
L*W*H mm |
1650*1250*750 |
2460*1280*1040 |
3600*1430*1820 |
3090*1600*1265 |
3700*1800*1300 |
|
Weight |
kg |
800 |
2100 |
3670 |
4000 |
7000 |
Salt centrifuge Configuration

Machine Casing
1. The casing Looking in front the machine , we can see there is a circle door on the casing , we can monitor the working condition of the machine well.
Also there is a feed pipe on the top of the casing, Screw conveyor for feeding is also available. And the solid cake outlet and liquid outlet at the bottom of the casing .
Rear of machine
There are main motor and pump motor devices. black back oil pump , kinds of instruments .
There is a counterweight at the bottom.It is used for balancing the gravity of the machine by filling the concrete .


Inner of baskets
There are two baskets , the main motor drives the baskets rotating ,and the oil pump motor drives the baskets pushing . and the screens are installed on the baskets for stopping the solid going with the liquid..
Baskets
There are two units of baskets for one unit of centrifuge , they are all made of stainless steel .


Bearing
High quality FAG bearings to make sure the machine work well.
Motor
High efficiency B3 motors with UL, CAS and TUV certificates .Compatible for 3 phase 220/380/460/660v-50hz/60hz..

Successful Project
Hot Tags: sea salt pusher centrifuge, China sea salt pusher centrifuge manufacturers, suppliers, factory















